Once the virtual network has been activated, you will need to set it up to share the VPN connection.To activate this virtual network, type:.You should see something similar to this: Netsh wlan set hostednetwork mode=allow ssid= NetworkName key= NetworkPassword To configure the shared network settings, such as the name and password, type in the following command:.
Alternatively, try using a different wireless card. If it says No, look for a newer version of your adapter drivers and install them. If the Hosted network supported line says Yes, you will be able to set up a virtual Wi-Fi adapter on your computer. In the Command Prompt, type the following:.Right-click on the result and select Run as administrator. You can do that by typing cmd in the Windows Search bar. Open the Windows Command Prompt (cmd.exe) as the administrator.The tutorial will specify when you can do so. Note: Make sure you are not connected to NordVPN. If you have a VPN-incompatible device that does not support any VPN protocols, you can connect to the internet using a shared Wi-Fi access point.
For more information, visit this page.įirst, connect your Windows PC to your network over Wi-Fi. Note: Recent Intel Wireless Adapters don't support the wireless hosted network feature on Windows 10. This article is available in French, German, Spanish and Italian.
0 kommentar(er)
